manualshive.com logo in svg

TP-Link MR4-WR642G, User Manual, Page: 71 / 82

Share
Download
TP-Link MR4-WR642G User Manual Download Page 71

MR4-WR642G

108M Wireless Router User Guide 

 

 66

seconds in the pull-down list. The Packets Statistic interval indicates the time section of the 

packets statistic. 

¾

 

Sorted Rules -

 Here displays sort as desired. 

¾

 

Statistics Table: 

IP Address

 

  The IP Address displayed with statistics 

Total 

Packets

The total amount of packets received and transmitted by the router. 

Bytes 

The total amount of bytes received and transmitted by the router. 

Current 

Packets

The total amount of packets received and transmitted in the last

 Packets 

Statistic interval

 seconds. 

Bytes 

The total amount of bytes received and transmitted in the last 

Packets 

Statistic interval

 seconds. 

ICMP Tx

The total amount of the ICMP packets transmitted to WAN in the last 

Packets Statistic interval

 seconds. 

UDP Tx

The total amount of the UDP packets transmitted to WAN in the last 

Packets Statistic interval

 seconds. 

TCP 

SYN Tx 

The total amount of the TCP SYN packets transmitted to WAN in the last 

Packets Statistic interval

 seconds. 

Click the 

Save

 button to save the 

Packets Statistic interval 

value. 

Click the 

Auto-refresh

 checkbox to refresh automatically. 

Click the 

Refresh

 button to refresh immediately. 

Appendix A: FAQ 

1.  How do I configure the router to access Internet by ADSL users? 

1)  First, configure the ADSL Modem configured in RFC1483 bridge model. 

2)  Connect the Ethernet cable from your ADSL Modem to the WAN port on the router. The 

telephone cord plugs into the Line port of the ADSL Modem. 

3)  Login to the router, click the “Network” menu on the left of your browser, and click "WAN" 

submenu. On the WAN page, select “PPPoE” for WAN Connection Type. Type user 

name in the “User Name” field and password in the “Password” field, finish by clicking 

“Connect”. 

 

Figure A-1    PPPoE Connection Type 

Summary of Contents for MR4-WR642G



















































































Reviews:

No comments