Smart Thermostatic Radiator Valve
Quick Start Guide
7106509348 REV1.0.0
Install Guide:
Scan QR code or visit
https://www.tp-link.com/support/faq/3404/
1.
Set up a Kasa smart hub in the Kasa Smart app if you
haven’t already done so. You can get the
Kasa Smart
app
from the App Store or Google Play.
If you want to remotely control / manage the valve, you need to add a Kasa smart hub first.
You can adjust temperature manually.
After inserting the batteries, the valve is ready to use.
Rotate the valve to increase / decrease temperature.
OR
2.
Use the provided cover-opener to press and hold the
SYNC/RESET
button for 5 seconds to reset the valve.
3.
Open the Kasa Smart app, tap + and select
Smart
Thermostats
. Follow the app instructions to pair the valve
and complete setup.
There are two types of valves:
Thermostatic
and
Manual
.
Kasa Smart Thermostatic Radiator Valve is only compatible with the thermostatic valve.
If your connector is
M30 x 1.5
, you can screw the new valve onto the radiator directly.
If not
, check whether one of the provided adapters fits the
connector
. If your none of them fit your
connector, please purchase a proper one yourself.
Thermostatic Valve
Manual Valve
1.
Check existing valve type
2.
Check the connector type
01 / Check Compatibility
03 / Install the Valve
04 / Set Up the Valve After Install
Don’t Have a Hub?
1.
Install the valve first before powering it up.
2.
No need to shut off water before changing the radiator
valve. Water will not leak.
3.
Avoid installing the valve in the same room where you
have installed the boiler thermostat.
4.
Install the valve within range of your Kasa smart hub if you
wish to control it using the Kasa Smart app.
02 / Install Requirements
1.
Unscrew the existing valve.
Read the following instructions first before installing
the new valve:
2.
Screw the new valve directly (for M30 x 1.5 connector) or after installing
the proper adapter (for non-M30 x 1.5 connectors). The ▲ at the bottom
of the valve indicates the position of the display.
4.
Open the battery cover and insert two AA LR6 Alkaline
batteries. Make sure the positive and negative
terminals face the correct direction.
3.
Remove the cover of the valve by rotating
counterclockwise using the provided cover-opener.
*Do NOT use rechargeable batteries or 1.2V AA batteries.
M30 x 1.5
RAVL Adapter
RAV Adapter
RA Adapter
30mm
1.5mm
Vertical Installation
Horizontal Installation
SYNC/RESET
*Images may differ from your actual product.
