Choose the menu
Cluster
→
NTDP
→
NTDP Config
to load the following page.
Figure 13-8 NTDP Config
The following entries are displayed on this screen:
¾
Global Config
NTDP:
Select Enable/Disable NTDP for the switch globally.
NTDP Interval Time:
Enter the interval to collect topology information. The default is 1
minute.
NTDP Hops:
Enter the hop count the switch topology collects. The default is 3
hops.
NTDP Hop Delay:
Enter the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
NTDP Port Delay:
Enter the time between the port forwarding NTDP request packets
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
¾
Port Config
Select:
Select the desired port for NTDP status configuration.
Port:
Displays the port number of the switch.
NTDP:
Displays NTDP status (enabled or disabled) of the current port.
188
