background image

JetStream L2/L2+ Managed Switch

01

Introduction

Chapter 1  Introduction

1.1  Product Overview

Designed for workgroups and departments, TP-Link JetStream L2/L2+ Managed Switch provides 

wire-speed performance and abundant L2 management features. It provides a variety of service 

features and multiple powerful functions with high security. 
The EIA-standardized framework and smart configuration capacity can provide flexible solutions 

for a variable scale of networks. ACL, 802.1x and Dynamic ARP Inspection provide robust security 

strategies. QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation 

(LACP) increases aggregated bandwidth, optimizing the transport of business critical data. SNMP, 

RMON, WEB and CLI Log-in bring abundant management policies. TP-Link JetStream L2/L2+ 

Managed Switch integrates multiple functions with excellent performance, and is friendly to manage, 

which can fully meet the need of the users demanding higher networking performance. 
TL-SG3210XHP-M2/TL-SG3428MP V2.0/TL-SG3428XMP/TL-SG3452P is also a Power Sourcing 

Equipment (PSE*). All the RJ45 ports on the switch support Power over Ethernet (PoE*) function, 

which can automatically detect and supply power to those powered devices (PDs*) complying with 

IEEE 802.3af and IEEE 802.3at.
*PSE: a device (switch or hub for instance) that provides power through an Ethernet cable.
*PoE: This technology describes a system to transmit electrical power, along with data, to remote 

devices over standard twisted-pair cable in an Ethernet.
*PD: a device powered by a PSE and thus consumes energy. Examples include powering network 

cameras, wireless LAN access points, IP telephones, network hubs, embedded computers etc.

1.2  Appearance

 

Front Panel

The front panel of 

TL-SX3008F

 is shown as the following figure.

Figure 1-1 

Front Panel of TL-SX3008F

LED

Console Port

(RJ45/USB)

SFP+ Slot

The front panel of 

TL-SG3210

 is shown as the following figure.

Figure 1-2 

Front Panel of TL-SG3210

1000Mbps

10/100Mbps

Activity

10/100/1000M

1000Mbps

100Mbps

Activity

SFP

2

1

4

3

6

5

8

7

10

9

PWR

SYS

10/100/1000M

TL-SG3210

L2+ Managed Switch

SFP

Console Port

(RJ45/USB)

LED

1G RJ45 Port

SFP Slot

Summary of Contents for JetStream L2





























Reviews: