102
4
Refer to T5 to clone the MAC address.
5
If you still cannot access the Internet, please restore your modem router to its factory
default settings and reconfigure your modem router by following the instructions
in
6
Please contact our Technical Support if the problem still exists.
T5 How to configure MAC Clone?
You can manually change the MAC address of the modem router. It is helpful when your
Internet access account provided by your ISP is bound to one specific MAC address,
in other words, your ISP just permits only one computer with the authenticated MAC
address to access the Internet. In this case, you can use MAC Clone to allow more
computers to access the Internet via the same account.
1
Visit
, and log in with password you set for the modem
router.
2
Go to
Advanced
>
Network
>
Internet
page. Click the
Add
icon, and scroll down to
get the
MAC Clone
section.
• If you are using the computer with the authenticated MAC address to access
the modem router, please select
Use Current Computer MAC Address
.
• If you know the authenticated MAC address, please select
Use Custom MAC
Address
and then enter the address.
3
Click
OK
to make the settings effective.
T6 How to use the modem router as a regular wireless router to share
my Internet ?
The modem router supports two operation modes, DSL Modem Router Mode and
Wireless Router mode. If you already have a modem or your Internet comes via an
Ethernet cable from the wall, you can set up the modem router as a regular wireless
router to share the Internet.
1
Connect your modem router’s LAN4/WAN port to the modem or the network port.
