Verify that the hardware connection
is correct by checking these LEDs.
4
Note:
1. The ADSL LED takes about 1 to 2 minutes to stabilize.
2. If the 2.4GHz LED and 5GHz LED are off, please press the Wi-Fi
button on the rear panel for 2 seconds, then check the LEDs again in a
few seconds.
Power On
On
5GHz
On
2.4GHz
On
ADSL
Quick Installation Guide
7106505550 REV1.0.2
Connecting the Hardware
ADSL Splitter
Phone Jack
Connect to the phone (Optional)
2
Connect the modem router to the
ADSL splitter.
3
Turn on the modem router.
Power Adapter
If you don’t need the phone service, just directly connect the modem router to
the phone jack with a phone cable, then follow steps 3 and 4 to complete the
hardware connection.
1
Connect the ADSL splitter
to the phone jack
.
Modem Router
AC750 Wireless Dual Band
ADSL2+ Modem Router