Quick Installation Guide
AC1200 Wireless Dual Band Gigabit Router
Connect the Hardware
Modem
Power adapter
Power adapter
Router
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, and then follow Step 4 and 5 to
complete the hardware connection.
Turn off the modem, and remove
the backup battery if it has one.
1
2
Connect the modem to the Internet
port on your router with an Ethernet cable.
Turn on the modem, and then
wait about
2 minutes
for it to restart.
3
Verify that the following LEDs are on
and solid before continuing with the
configuration.
5
Power
On
On
Internet
2.4G
On
5G
On
Note: If the 2.4G LED and 5G LED are off, please
press the WPS/Wi-Fi On/Off button for 2 seconds and
check the LEDs again in a few seconds later.
For optimum performance,
orient the antennas as
shown in the drawing.
Internet
Turn on the router.
4
