16
GB
Function introduction for combination buttons
Energy-saving function
Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to
start up or turn off energy-saving function. When energy-saving function is started
up, "SE" will be shown on remote controller, and air conditioner will adjust the set
temperature automatically according to ex-factory setting to reach to the best
energy-saving effect. Press "TEMP" and "CLOCK"buttons simultaneously again to
exit energy-saving function.
Note:
Ɣ8QGHUHQHUJ\VDYLQJIXQFWLRQIDQVSH
ed is defaulted at auto speed and it can’t
be adjusted.
Ɣ
Under energy-saving function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
Ɣ6OHHSIXQFWLRQDQGHQHUJ\VDYLQJIXQFW
ion can’t operate at the same time. If
energy-saving function has been set under cooling mode, press sleep button will
cancel energy-saving function. If sleep function has been set under cooling
mode, start up the energy-saving function will cancel sleep function.
8
ć
heating function
Under heating mode, press "TEMP" and "CLOCK" buttons simultaneously to start
up or turn off 8
ć
heating function. When this function is started up, " " and "8
ć
"
will be shown on remote controller, and the air conditioner keep the heating status
at 8
ć
. Press "TEMP" and "CLOCK" buttons simultaneously again to exit 8
ć
heating function.
Note:
Ɣ8QGHU
ć
heating function, fan speed is defaulted at auto speed and it can’t be
adjusted.
Ɣ8QGHU
ć
heating function, set temperature can’t be adjusted. Press "TURBO"
button and the remote controller won’t send signal.
Ɣ6OHHSIXQFWLRQDQG
ć
heating function can’t operate at the same time. If 8
ć
heating function has been set under cooling mode, press sleep button will cancel
8
ć
heating function. If sleep function has been set under cooling mode, start up
the 8
ć
heating function will cancel sleep function.
Ɣ8QGHU
̧
temperature display, the remote controller will display 46
̧
heating.
Child lock function
3UHVVŸDQGVLPXOWDQHRXVO\WRWXUQRQRUWXUQR
ff child lock function. When
child lock function is on, " " icon is displayed on remote controller. If you operate
the remote controller, the " " icon will blink three times without sending signal to
the unit.
Ÿ
Temperature display switchover function
Under OFF status, press " " and "MODE" buttons simultaneously to switch temp-
erature display between
ć
and
̧
.
Ÿ
