TROUBLESHOOTING
Problem
- 2 -
Analysis
Does not run
·
If the protector trip or fuse is blown.
·
Please wait for 3 minutes and start again, protector
device may be preventing unit to work.
·
If batteries in the remote controller exhausted.
·
If the plug is not properly plugged.
Run a short while
only
Run but not cool
Do not run and water
full indicator lights
·
If the set temperature is close to room temperature,
you can low the set temperature.
·
Air outlet be blocked by obstacle.
Take the obstacle away.
·
If the door or window open.
·
If there is other heater appliance work,
like heater or lamp, etc...
·
The air filter is dirty, please clean it.
·
Air outlet or intake be blocked.
·
Set temperature is too high.
·
Drain the water into a prepared container by the drainage
pipe on the rear panel of the unit.
If still doesn't work, please consult a qualified technician.
