Toyotomi KS-47B, Operation And Maintenance Instructions

Page: 14 / 20

REPLACEMENT OF PARTS
REPLACING THE WlCK
USE ONLY GENUINE TOYOTOMI ”KS-47B” REPLACEMENT WlCK. SUBSTITUTE WICKS CAN SEVERELY
REDUCE PERFORMANCE AND SAFETY.
1. Release the automatic extinguisher by pushing the manual shutoff down.
2. Remove the three (3) screws and lift cover off.
3. Remove the four (4) wing nuts around the wick adjuster. Lift the wick adjuster
off the heater while moving it slightly back and forth.
4. Slide two fingers between the orange band on the wick and the silver wick
sleeve attached to the wick adjuster. Lift the pins in the wick off the slots in the
wick sleeve. After lifting all three (3) pins off the slots, fold the wick and
remove it. Leave the wick sleeve in place.
12
WARNING: Before disassembling your heater, allow it to cool completely.
KS-47B_US.qxd 14.7.25 13:18 ページ 12