Toyotomi HTN/HTG-717R32, User Manual

Page: 39 / 128

39
GB
Check after installation
Test operation
Ɣ Check according to the following requirement after finishing installation.
Items to be checked Possible malfunction
Has the unit been installed rmly? The unit may drop, shake or emit noise.
Have you done the refrigerant leakage
test? It may cause insuf cient cooling
(heating) capacity.
Is heat insulation of pipeline suf cient?
It may cause condensation and water
dripping.
Is water drained well?
It may cause condensation and water
dripping.
Is the voltage of power supply accord-
ing to the voltage marked on the
nameplate?
It may cause malfunction or damaging
the parts.
Is electric wiring and pipeline installed
correctly? It may cause malfunction or damaging
the parts.
Is the unit grounded securely? It may cause electric leakage.
Does the power cord follow the speci-
cation?
It may cause malfunction or damaging
the parts.
Is there any obstruction in the air inlet
and outlet? It may cause insuf cient cooling
(heating) capacity.
The dust and sundries caused during
installation are removed? It may cause malfunction or damaging
the parts.
The gas valve and liquid valve of
connection pipe are open completely? It may cause insuf cient cooling
(heating) capacity.
1. Preparation of test operation
Ɣ
Specify the important notes for air conditioner to the client.
2. Method of test operation
Ɣ
Put through the power, press ON/OFF button on the remote controller to start
operation.
Ɣ
Press MODE button to select AUTO, COOL, DRY, FAN and HEAT to check
whether the operation is normal or not.
Ɣ
If the ambient temperature is lower than 16 , the air conditioner can’t
start cooling.
Is the inlet and outlet of piping hole
been covered? It may cause insufficient cooling
(heating) capacity or waster eletricity.