background image

ENGLISH

,

8

4) Set the temperature of the program

The set temperature “21” will be shown on the display and it will flash.
1. Press the “

s

MIN.” button or the “

t

HOUR” button to set the temperature of the program.

2.  Press the “SET” button to complete the set the temperature of the program and move to the next step (5) 

Set a day of the week of the program).

5) Set a day of the week of the program

1.  The “dAy” sign will be shown on the display and the “SUN” will flash. Press the “

s

MIN.” button or the 

t

HOUR” button to set a day of the week of the program. When pressing the “

s

MIN.” button, the 

program is set at the day of the week. The selected day of the week will light. When pressing the “

t

HOUR” 

button, the selected day of the week is not set. The unset day of the week will go off. At this time, the sign 
is moved to the next day of the week automatically.

When pressing the “DAY SELECT” button, the display will be shown the next day of the week without 
resetting.

2.  Press the “SET” button to complete the set of a day of the week of the program and it will go back to the 

select of the program number.

NOTE:  If no day of week is set, when pressing the “SET” button, yo can hear the beep sound and cannot 

move to the next step.

2.  Activate Weekly Timer Operation

1.  During operation (in a SW/ON position), press the “AUTO” button to enter the weekly timer operation mode. 

The “AUTO” sign will be shown on the display.
NOTE: If no program is set, you can hear the beep sound and cannot enter the weekly timer operation mode.

2. Press the “

s

MIN.” button or the “

t

HOUR” button to change the set temperature.

NOTE: If the next program starts, the temperature will be changed to the temperature of the next program.

3.  During operation, press the “TIMER” button to enter the weekly timer set mode (Select of the program 

number).

NOTE:  If the “TIMER” button is pressed during the setting of the weekly timer set mode, the weekly timer set 

mode is released.

Change of setting is applied as soon as the AUTO operation starts.

NOTE:  If ON/OFF switch is pressed during the weekly timer operation mode, the weekly timer operation 

mode is canceled.

Summary of Contents for FF-55



















Reviews: