Toyota Yaris Sedan 2008, Quick Reference Manual

Page: 263 / 384

250
4-3. Do-it-yourself maintenance
Wheels
n
When replacing wheels
The wheels of your Toyota are equipped with sensors that allow the tire
pressure warning system sensors to provide advanced warning in the
event of a loss in tire inflation pressure. Whenever wheels are replaced,
the tire pressure warning valve and transmitter must be switched over
from the old wheels. (
→
P. 241)
If a wheel is bent, cracked or heavily corroded, it should be
replaced.
Otherwise, the tire may separate from the wheel or cause loss of
handling control.
n
Wheel selection
When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and offset.
Replacement wheels are available at your Toyota dealer.
Toyota does not recommend using:
l
Wheels of different sizes or types
l
Used wheels
l
Bent wheels that have been straightened
n
Aluminum wheel precautions (if equipped)
l
Use only Toyota wheel nuts and wrench designed for use with
your aluminum wheels.
l
When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).
l
Be careful not to damage the aluminum wheels when using
tire chains.
l
Use only Toyota genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.