Toyota Venza 2021, Manual

Page: 161 / 548

159
3-3. Adjusting the seats
3
Before
driving
 The power switch has been
turned to OFF.
 The driver’s seat belt has
been unfastened.
When any of the following has
been performed, the driver’s
seat and steering wheel auto-
matically return to their original
positions.
 The power switch has been
turned to ACC or ON.

The driver’s seat belt has
been fastened.
■ Operation of the power easy
access system
When exiting the vehicle, the power
easy access system may not oper-
ate if the seat is already close to the
rearmost position, etc.
■ Customization
The seat movement amount set-
tings of the power easy access sys-
tem can be customized.
(Customizable features:

P.507)
■
Recording procedure
1
Check that the shift lever is in
P.
2
Turn the power switch to ON.
3
Adjust the driver’s seat,
steering wheel and head-up
display (if equipped) to the
desired positions.
4
While pressing the “SET” but-
ton, or within 3 seconds after
the “SET” button is pressed,
press button “1” or “2” until
the buzzer sounds.
If the selected button has already
been preset, the previously
recorded position will be overwrit-
ten.
■
Recall procedure
1
Check that the shift lever is in
P.
2
Turn the power switch to ON.
3
Press one of the buttons for
the driving position you want
to recall until the buzzer
sounds.
■ To stop the position recall oper-
ation part-way through
Perform any of the following:
● Press the “SET” button.
● Press button “1” or “2”.
● Operate any of the seat adjust-
ment switches (only cancels seat
position recall).
Recording/recalling a
driving position