Toyota Tundra guide, Manual

Page: 372 / 672

372
5-9. Bluetooth
®
phone
Making a call
Display the phone screen. (
→
P. 370)
Select the “Dial Pad” tab and enter a phone number.
To delete the input phone number, select .
For the first digit, you can enter “+” by selecting “
∗
” for a while.
Press the switch on the steering wheel or select .
You can dial a number from the contact data imported from your cellu-
lar phone. The system has one contact for each registered phone. Up
to 2500 contacts may be stored in each contact. (
→
P. 372)
Display the phone screen. ( → P. 370)
Select “Contacts” tab.
Choose the desired contact to call from the list.
Choose the number and then press the
switch on the steering
wheel or select .
You can transfer the phone numbers in a Bluetooth
®
phone to the sys-
tem.
Operation methods differ between PBAP (Phone Book Access Profile)
compatible and PBAP incompatible Bluetooth
®
phones. If the cellular
phone does not support either PBAP or OPP (Object Push Profile)
service, you cannot transfer contacts.
■
For PBAP compatible Bluetooth
®
phones

When “Automatic Transfer” is set to on (
→
P. 386)
Check that a confirmation screen is displayed when the opera-
tion is complete.
Transfer the contact data to the system using a Bluetooth
®
phone.
Once a Bluetooth
®
phone is registered, you can make a call
using the following procedure:
Dialing
Dialing from the contacts list
When the contact is empty
1
2
3
1
2
3
4
1