Instruction
Form：DP5-005 Revised：05
10
Word explanation
●
Operation mode of wireless ST
Status
Contents
Search Mode
Initial status after start.
Search wireless terminal (Initial mode, Parameter writing wait
mode) by wireless.
Inspection Mode
Perform diag communication with the vehicle through wireless
terminal (Inspection mode).
Parameters Write Mode
Write parameter for wireless terminal (Parameter write mode).
Write BodyNo mainly.
Maintenance Mode
Change wireless ST parameter (Through wired LAN)
。
No wireless communication at this mode.
●
Operation mode of wireless terminal
Status
Contents
Initial Mode
Initials status after start in BodyNo wireless registered
terminals.
Wait for test mode transition instruction from wireless ST.
Inspection Mode
Diag communication is performed. According to wireless ST
instruction, Diagnostic program communication with vehicle is
performed, and send communication results to wireless ST.
Mode to confirm write completion result.
Software Write Mode
Mode that downloads software write data and performs write.
Parameter Write Wait Mode Status of start at BodyNo delete.
Wait receiving shift instruction to parameter write mode.
Parameter Write Mode
Register (write) BodyNo that was instructed by wireless ST
register.
Sleep Mode
Modes that is running on power savings.
Shift to sleep mode if set time by initial or parameter write
mode is passed.
●
[Radio frequency]
Communication is performed out in setting frequency. it is necessary to match the radio frequency of
wireless ST and wireless terminals for communication.
