manualshive.com logo in svg

Toyota Tacoma 2014, Manual, Page: 346 / 601

Share
Download
Toyota Tacoma 2014 Manual Download Page 346

346

3-2. Using the multimedia system

NOTICE

■

To avoid damaging the antenna

Remove the antenna in the following situations.

●

When using an automatic carwash.

●

When the antenna will touch the ceiling of a garage, etc.

●

When covering the vehicle with a car cover.

■

Removing the antenna

●

For normal driving, make sure the antenna is installed.

●

When removing the antenna to use an automatic carwash, etc., be careful
not to lose the antenna. Also, make sure to reinstall the antenna before
driving the vehicle.

■

Using the wrench

●

When installing or removing the antenna, use the included wrench or a
standard 5/16 in. (8 mm) wrench.

●

Be careful not to scratch or damage the vehicle body with the wrench.

●

Do not over-tighten the antenna.
Over-tightening may damage the antenna.

●

Do not use pliers to install or remove the antenna.
Pliers may damage the antenna’s finish.

Summary of Contents for Tacoma 2014


























































































































































































































































































































































































































































































































































































































Reviews:

No comments