Toyota Tacoma 2004 Operating Manual Download

Page: 313 / 343

’04 Tacoma U (L/O 0309)

313

2004 TACOMA from Sep. ’03 Prod. (OM35814U)

1. Open the hood. Unplug the connec-

tor. Remove the rubber cover.

If the connector is tight, wiggle it.

2. Release the bulb retaining spring

and remove the bulb. Install a new
bulb and the bulb retaining spring.

To install a bulb, align the tabs of the
bulb with the cutouts of the mounting
hole.

3. Install the rubber cover with the

“TOP PULL” mark upward and fit it
securely on the boss. Then plug in
the connector.

Make sure the rubber cover fits securely
on the bulb base and the mounting body.

Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.

—Headlights

Summary of Contents for Tacoma 2004
























































































































































































































































































































































Search results

Summary of Contents for Tacoma 2004

Reviews:

Related manuals for Tacoma 2004

Brands by name

Popular brands

Toyota Tacoma 2004, Operating Manual

Search results

Summary of Contents for Tacoma 2004

Reviews:

Related manuals for Tacoma 2004

Brands by name

Popular brands