Toyota Tacoma 2000 Page 157 Operating Manual Download

Page: 157 / 268

’00 Tacoma(U)

157

NOTICE

Do not use gasohol other than
stated above. It will cause fuel sys-
tem damage or vehicle performance
problems.

If driveability problems occur (poor
hot starting, vaporizing, engine
knock, etc.), discontinue the use.

Take care not to spill gasohol dur-
ing refueling. Gasohol may cause
paint damage.

FUEL TANK CAPACITY

Two- wheel drive models
except Pre Runner

57 L (15.1 gal., 12.5 Imp. gal.)

Four- wheel drive models
and Pre Runner

68 L (18.0 gal., 15.0 Imp. gal.)

Operation in foreign countries

If you plan to drive your Toyota in
another country...

First, comply with the vehicle registration
laws.

Second, confirm the availability of the cor-
rect fuel (unleaded and minimum octane
number).

Three- way catalytic
converter—

Except LEV

∗

LEV

∗

Summary of Contents for Tacoma 2000













































































































































































































































































Search results

Summary of Contents for Tacoma 2000

Reviews:

Related manuals for Tacoma 2000

Brands by name

Popular brands

Toyota Tacoma 2000, Operating Manual

Search results

Summary of Contents for Tacoma 2000

Reviews:

Related manuals for Tacoma 2000

Brands by name

Popular brands