Toyota Supra 1997 Manual Download Page 21

Page: 21 / 192

SUPRA (U)

2. Place the rear edge on first and then

the front edge.

Before installation, be sure to take the

caps and plugs off.

CAUTION

To minimize the risk of personal inju-
ry, make sure all four corners are
securely fixed on the brackets after
installation.

3. Tighten the bolts and lock the center

lock in the order shown. (See ”—De-
taching from vehicle” for details.)

Note that all five connections need to be
tight to secure the sport roof.
Reverse the wrench handle so the

”TIGHTEN” side faces toward you and
turn it clockwise.
Check that the roof is correctly installed
by lightly trying to move the roof.
Put the wrench, handle, caps and plugs

back in the tool bag in the console box.

CAUTION

Make sure to tighten all four bolts
and to lock the center lock when
installing the sport roof.

Summary of Contents for Supra 1997

































































































































































































Search results

Summary of Contents for Supra 1997

Reviews:

Related manuals for Supra 1997

Brands by name

Popular brands

Toyota Supra 1997, Manual

Search results

Summary of Contents for Supra 1997

Reviews:

Related manuals for Supra 1997

Brands by name

Popular brands