Home
/
Toyota
/
SIENNA - 2011
/
Quick Reference Manual

Toyota SIENNA - 2011, Quick Reference Manual, Page: 693 / 842

Share

Page: 693 / 842

Toyota SIENNA - 2011 Quick Reference Manual Download Page 693

635

4-3. Do-it-yourself maintenance

4

Mainten

ance an

d ca

re

NOTICE

■

Repairing or replacing tires, wheels, tire pressure warning valves
and transmitters and tire valve caps

●

When removing or fitting the wheels, tires or the tire pressure warning
valves and transmitters, contact your Toyota dealer as the tire pres-
sure warning valves and transmitters may be damaged if not handled
correctly.

●

When replacing tire valve caps, do not use tire valve caps other than
those specified. The cap may become stuck.

■

To avoid damaging the tire pressure warning valves and transmit-
ters

Do not use liquid sealants on flat tires.

■

Driving on rough roads

Take particular care when driving on roads with loose surfaces or pot-
holes.
These conditions may cause losses in tire inflation pressure, reducing
the cushioning ability of the tires. In addition, driving on rough roads may
cause damage to the tires themselves, as well as the vehicle’s wheels
and body.

■

If tire inflation pressure of each tire becomes low while driving

Do not continue driving, or your tires and/or wheels may be ruined.

«
...
691
692
693
694
695
...
»

Summary of Contents for SIENNA - 2011











































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments