Toyota SEQUOIA 2006 Owner'S Manual Download Page 267

Page: 267 / 479

’06_SEQUOIA_U (L/O 0508)

257

NOTE:

The playback condition of some

DVD video discs may be determined by

a DVD video software producer. This

DVD player plays a disc as the software

producer intended. So, some functions

may not work properly. Be sure to read

the instruction manual for the DVD vid-

eo disc separately provided. For de-

tailed information about DVD video

discs, see “—DVD video disc informa-

tion” on page 280 in this Section.
Precautions for DVD video discs

When recording on a DVD video, DVD

audio, video CD or audio tracks may not

record in some cases while the menu is

displayed. As audio will not play in this

case, verify that the video tracks are play-

ing and then activate playback.
When playback of a disc is completed:

If an audio CD is playing, the first

track starts.

If a DVD video, DVD audio or video

CD is playing, playback will stop or the
menu screen will be displayed.

The title/chapter number and playback

time display may not appear while playing
back certain DVD video discs.

CAUTION

Conversational speech on some DVDs
is recorded at a low volume to em-

phasize the impact of sound effects.

If you adjust the volume assuming
that the conversations represent the

maximum volume level available for

the DVD, you may be startled by
louder sound effects or when you

change to a different audio source.

Loud sounds may have a significant
impact on the human body or pose a

driving hazard. Keep this in mind

when you adjust the volume.

DVD video

DVD audio

—DVD player operation (DVD

video/DVD audio)

Summary of Contents for SEQUOIA 2006
































































































































































































































































































































































































































































































Search results

Summary of Contents for SEQUOIA 2006

Reviews:

Brands by name

Popular brands

Toyota SEQUOIA 2006, Owner'S Manual

Search results

Summary of Contents for SEQUOIA 2006

Reviews:

Brands by name

Popular brands