Toyota RAV4 2020, Owner'S Manual, Page: 239 / 275

237
7
7-2. Setup
Phone
3
Select “Update contact”.
4
Select the desired contact.
5
Select a phone type for the
phone number.
*
: For PBAP compatible Bluetooth
®
phones, this function is available
when “Automatic transfer” is set to
off. (

P.236)
●
When an Android Auto connection is
established, this function will be
unavailable.
*
*
: This function is not made available in
some countries or areas.

When the contact is not regis-
tered
1
Select “Transfer contacts from
device”.
2
Select “From phone
(Bluetooth)”.
3
Transfer the contact data to the
system using a Bluetooth
®
phone.

This operation may be unneces-
sary depending on the type of
Bluetooth
®
phone.

To cancel this function, select
“Cancel”.
4
Check that a confirmation
screen is displayed when the
operation is complete.
 When the contact is registered
1
Select “Transfer contacts from
device”.
2
Select “From phone
(Bluetooth)”.
3
Select “Replace contacts” or
“Add contact”.
“Replace contacts”: Select to transfer
the contact from the connected cellular
phone and replace the current one.
“Add contact”: Select to transfer the
desired contact data from the con-
nected cellular phone to add to the cur-
rent one.
4
Transfer the contact data to the
system using a Bluetooth
®
phone.

This operation may be unneces-
sary depending on the type of
Bluetooth
®
phone.

To cancel this function, select
“Cancel”.
5
Check that a confirmation
screen is displayed when the
operation is complete.
Backed-up contact data (“vCard”
formatted) can be transferred from
USB device or Bluetooth
®
phone to
this system.
1
Open the lid and connect a USB
device. (

P.118)
Transfer contacts from
device
From phone (OPP compatible
Bluetooth
®
phones only)
From USB device