Toyota Rav 4 2001 Page 84 Instruction Manual Download

Page: 84 / 265

’01 Rav4_U (L/O 0008)

2001 RAV4 (OM42483U)

Do not bend the key grip.

Do not cover the key grip with any
material that cuts off electromagnet-
ic waves.

Do not knock the key hard against
other objects.

Do not leave the key exposed to
high temperatures for a long period,
such as on the dashboard and hood
under the direct sunlight.

Do not put the key in water or
wash it in an ultrasonic washer.

Do not use the key with electromag-
netic materials.

KEY NUMBER PLATE

Your key number is shown on the plate.
Keep the plate in a safe place such as
your wallet, not in the vehicle.

If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.

We recommend you to write down the key
number and keep it in safe place.

Summary of Contents for Rav 4 2001










































































































































































































































































Search results

Summary of Contents for Rav 4 2001

Reviews:

Related manuals for Rav 4 2001

Brands by name

Popular brands

Toyota Rav 4 2001, Instruction Manual

Search results

Summary of Contents for Rav 4 2001

Reviews:

Related manuals for Rav 4 2001

Brands by name

Popular brands