Toyota PZQ72-48050 Fitting Instructions Manual Download Page 8

Page: 8 / 12

ISSUE

20/03/2017

PART NUMBER: PZQ72-480

PAGE 8 OF 15

STEP 13

STEP 14

STEP 15

STEP 16

Reinstall the headliner and rear trim panels.

- C & D pillar trims

- Upper quarter window trims

- Lower quarter trims

- Grab Handles

Temporarily fold back the rear carpet to expose the

oor pan.

Measure and mark the rear quarter trims as shown.

Using a sharp knife or other cutting tool, cut the trim as

speci

ed.

Place a lower leg on the

oor pan and align with the

drilled holes.

Using the hole in the top of the leg as a guide, mark the

centre of the hole on the trim.

Using a 19mm hole saw, drill a hole at the marked

point. Ensure a 10mm drill stop is used.

Repeat for left hand side.

Using the

oor pan template (Pg.15), align the template

with the contours of the

oor pan.

Using a drill

tted with a 10mm drill stop, drill at the

marked points.

Drill the outer holes using a 7mm drill piece and the

centre holes with a 19mm hole saw.

Deburr the edges, remove swarf and coat with anti-rust

grease.

Repeat for left hand side.

280mm

FRONT OF VEHICLE

Summary of Contents for PZQ72-48050













Search results

Summary of Contents for PZQ72-48050

Reviews:

Brands by name

Popular brands

Toyota PZQ72-48050, Fitting Instructions Manual

Search results

Summary of Contents for PZQ72-48050

Reviews:

Brands by name

Popular brands