Toyota PT546-1C182, Owner'S Manual

Page: 123 / 144

123
5. SETUP
Highlander_Navi_MXS
5
SE
TUP

FOR PBAP COMPATIBLE Bluetooth
®
PHONES
1
Touch “Update Contacts from
Phone” .
 Contacts are transferred automatically.
2
Check that a confirmation screen is
displayed when the operation is com-
plete.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
 If another Bluetooth
®
device is connected
when transferring contact data, depending
on the phone, the connected Bluetooth
®
device may need to be disconnected.
 Depending on the type of Bluetooth
®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.

FOR PBAP INCOMPATIBLE BUT
OPP COMPATIBLE Bluetooth
®
PHONES
1
Touch “Update Contacts from
Phone” .
2
Transfer the contact data to the system
using a Bluetooth
®
phone.
 This operation may be unnecessary
depending on the type of cellular phone.
 Depending on the type of cellular phone,
OBEX authentication may be required
when transferring contact data. Enter
“1234” into the Bluetooth
®
phone.
 To cancel this function, touch “Cancel” .
3
Check that a confirmation screen is
displayed when the operation is com-
plete.
INFORMATION
 Depending on the type of phone, certain
functions may not be available.
 Contact data is managed independently
for every registered phone. When one
phone is connected, another phone’s
registered data cannot be read.
UPDATE CONTACTS FROM
PHONE
Operation methods differ between
PBAP compatible and PBAP incom-
patible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the contacts can-
not be transferred.
This operation cannot be performed
while driving.