Toyota PT398-47091, Installation Manual

Page: 31 / 33

TOYOTA PRIUS 2010– TVIP V4
CHECKLIST – these points
MUST
be checked to ensure a quality installation.
REMOTE ENGINE STARTER (RES)
Page 31 of 33 Issue : D 05/22/09
Accessory Function Checks
Close the hood, place the shift lever in the “P” (park) position, set the parking brake and turn off Pre-Air Conditioning
System. With the smart key in your possession, turn the vehicle off, exit the vehicle and close all doors.
1 Press the remote control’s lock button twice
within 2 seconds, then press and hold the lock
button for 3 seconds.
The hazard lights flash after 3 seconds.
The engine starts.
The hazard lights flash repeatedly for 20 seconds.
2 Press the remote control’s unlock button. The engine stops.
The hazard lights flash twice.
3 Start the Vehicle again using the remote. With
the engine running, press and hold the remote
control’s lock button for 2 seconds.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
4 Start the Vehicle again using the remote. With
the remote in your possession pressing the
button on the driver's exterior door handle to
unlock the vehicle.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
Enter the vehicle and close all doors.
5 Start the Vehicle again using the remote. With
the engine running, manually unlock any door
with the inside lock switch.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
The security alarm triggers. (if equipped)
6 Start the Vehicle again using the remote. With
the engine running, push down on the accelera-
tor until the engine speed exceeds 3000 RPMs.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
7 Start the Vehicle again using the remote. With
the engine running, push on the foot brake.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
8 Start the Vehicle again using the remote. With
the engine running, press the ignition button on
the dash.
Refer to Step 1.
The engine stops.
The hazard lights flash once
9 Move the shift lever out of “P” (Park). Attempt to
start the Vehicle using the remote.
The engine does not start.
10 Start the Vehicle again using the remote. With
the engine running, pull the hood release handle.
Refer to Step 1.
The engine stops.
The hazard lights flash once.
The security alarm triggers. (if equipped)