manualshive.com logo in svg

Toyota PriusV, Owner'S Manual, Page: 259 / 590

Share
Download
Toyota PriusV Owner'S Manual Download Page 259

258

3-1. Using the air conditioning system and defogger

PRIUS v_AE (OM47779E)

■

Outside temperature display

In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change.

●

When stopped, or driving at low speeds (less than 25 km/h [16 mph])

●

When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)

■

Operation of the air conditioning system in Eco drive mode

In the Eco drive mode, the air conditioning system is controlled as follows to
prioritize fuel efficiency:

●

Engine speed and compressor operation controlled to restrict heating/
cooling capacity

●

Fan speed restricted when automatic mode is selected

To improve air conditioning performance, perform the following operations:

●

Adjust the fan speed and temperature

●

Turn off Eco drive mode (

→

P. 183)

●

Customize the air conditioning control of Eco drive mode. (

→

P. 564)

■

When outside air temperature is below 0 

°

C (32 

°

F)

The cooling and dehumidification function may not operate even when

 

is pressed.

■

Air conditioning odors

●

During use, various odors from inside and outside the vehicle may enter
into and accumulate in the air conditioning system. This may then cause
odor to be emitted from the vents.

●

To reduce potential odors from occurring: 

• It is recommended that the air conditioning system be set to outside air

mode prior to turning the vehicle off.

• The start timing of the blower may be delayed for a short period of time

immediately after the air conditioning system is started in automatic
mode.

Not 

For 

Reproduction

Summary of Contents for PriusV















































































































































































































































































































































































































































































































































































































Reviews:

No comments