Toyota Prius+ Owner'S Manual Download

Page: 547 / 580

547

6-1. Specifications

Vehi

e specificatio

PRIUS +_OM_OM47821E_(EE)

Cooling system

Ignition system

Capacity

Gasoline
engine

Without an exhaust heat recovery system

6.5 L (6.9 qt., 5.7 Imp.qt.)

With an exhaust heat recovery system

6.9 L (7.3 qt., 6.1 Imp.qt.)

Power
control
unit

2.7 L (2.9 qt., 2.4 Imp.qt.)

Coolant type

Use either of the following:

• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-

silicate, non-amine, non-nitrite, and non-borate
coolant with long-life hybrid organic acid technol-
ogy

Do not use plain water alone.

Spark plug

Make

DENSO SC20HR11

Gap

1.1 mm (0.043 in.)

NOTICE



Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands