manualshive.com logo in svg

Toyota Prius+, Owner'S Manual

The Toyota Prius+ is a highly efficient and eco-friendly hybrid vehicle. Enhance your driving experience with its spacious design and advanced technology. Find a comprehensive user manual with detailed instructions for free download at manualshive.com, providing you with essential information to fully utilize this exceptional automotive marvel.

Share
Download
background image

5

469

Wh
en tro

uble

 a

rises

PRIUS +_OM_OM47821E_(EE)

5-2. Steps to take in an emergency

If a warning light turns on or a warning buzzer sounds

Stop the vehicle immediately. Continuing to drive the vehicle
may be dangerous.

The following warning indicates a possible problem in the brake sys-
tem. Immediately stop the vehicle in a safe place and contact any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.

*

1

: Brake system warning buzzer:

When there is a possible problem that could affect braking performance, the
warning light will come on and a warning buzzer will sound.

*

2

: Parking brake engaged warning buzzer:

A buzzer will sound if the vehicle is driven at a speed of approximately 5 km/h
(3 mph) or more.

Warning light

Warning light/Details

 

Brake system warning light and warning buzzer (red 
indicator)

*

1, 2

• Low brake fluid
• Malfunction in the brake system

This light also comes on when the parking brake is not 
released. If the light turns off after the parking brake is 
fully released, the system is operating normally.

Calmly perform the following actions if any of the warning lights
comes on or flashes. If a light comes on or flashes, but then goes
off, this does not necessarily indicate a malfunction in the system.
However, if this continues to occur, have the vehicle inspected by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Prius+

Jeep 2014 Wrangler Owner'S Manual preview
2014 Wrangler
Brand: Jeep Pages: 673
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Jacob Jensen Electronic Parking Disc 3 Quick Manual preview
Electronic Parking Disc 3
Brand: Jacob Jensen Pages: 2
Yakima K1005 Instructions Manual preview
K1005
Brand: Yakima Pages: 12
Bimmer Jakes FRONT HEADLIGHT LENS COVER Replacement Manual preview
FRONT HEADLIGHT LENS COVER
Brand: Bimmer Jakes Pages: 4
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
BMW 3-series convertible Complete Vehicle Workbook preview
3-series convertible
Brand: BMW Pages: 98
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
MAcarbon Ferrari 360 Map Carbon Light Installation Instructions preview
Ferrari 360 Map Carbon Light
Brand: MAcarbon Pages: 4
Honda 08A06-361-210 Installation Instructions preview
08A06-361-210
Brand: Honda Pages: 4
Pro-gard SAFESTOP SS0005 Installation Manual preview
SAFESTOP SS0005
Brand: Pro-gard Pages: 4
Renault ALASKAN 2017 Driver'S Handbook Manual preview
ALASKAN 2017
Brand: Renault Pages: 340
Mercedes-Benz 2015 SLK Operator'S Manual preview
2015 SLK
Brand: Mercedes-Benz Pages: 358
RAM 1500 2WD 2021 Owner'S Manual preview
1500 2WD 2021
Brand: RAM Pages: 496
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Honda 08V31-TE0-100A Installation Instructions Manual preview
08V31-TE0-100A
Brand: Honda Pages: 10
Hella 2DA 008 136-031 Mounting Instructions preview
2DA 008 136-031
Brand: Hella Pages: 2
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9

Brands by name

Popular brands

Load more brands