Toyota Prius+ Owner'S Manual Download

Page: 321 / 580

321

2-5. Driving information

hen drivi

PRIUS +_OM_OM47821E_(EE)

Selecting tire chains

Use the correct tire chain size when mounting the tire chains. Chain
size is regulated for each tire size.

Side chain:

3.0 mm (0.12 in.)
30.0 mm (1.18 in.)
10.0 mm (0.39 in.)

Cross chain:

4.0 mm (0.16 in.)
25.0 mm (0.98 in.)
14.0 mm (0.55 in.)

Regulations on the use of tire chains

Regulations regarding the use of tire chains vary depending on loca-
tion and type of road. Always check local regulations before installing
chains.



Tire chain installation

Observe the following precautions when installing and removing chains:



Install and remove tire chains in a safe location.



Install tire chains on the front tires only. Do not install tire chains on the
rear tires.



Install tire chains on front tires as tightly as possible. Retighten chains
after driving 0.5 - 1.0 km (1/4 - 1/2 mile).



Install tire chains following the instructions provided with the tire chains.

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands