Toyota Prius+ Owner'S Manual Download Page 214

Page: 214 / 580

214

2-1. Driving procedures

PRIUS +_OM_OM47821E_(EE)

Power (ignition) switch

Performing the following operations when carrying the electronic
key on your person starts the hybrid system or changes “POWER”
switch modes.



Starting the hybrid system

Check that the parking brake is set.
Firmly depress the brake pedal.

Check that the “POWER” switch indicator turns green. If the indi-
cator does not turn green, the hybrid system cannot be started.

When the shift position is N, the hybrid system cannot start. Shift
the shift position to P when starting the hybrid system. (



P. 227)

Press the “POWER” switch.

The hybrid system can be
started from any “POWER”
switch mode.

Continue depressing the brake
pedal until the hybrid system is
completely started.

STEP

Summary of Contents for Prius+





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands

Toyota Prius+, Owner'S Manual

Search results

Summary of Contents for Prius+

Reviews:

Related manuals for Prius+

Brands by name

Popular brands