Toyota Prius Manual Download

Page: 613 / 680

613

5-2. Steps to take in an emergency

Wh
en tro

uble

rises

PRIUS PHV_OM_OM47831E_(EE)

If the hybrid system will not start

Reasons for the hybrid system not starting vary depending on the
situation. Check the following and perform the appropriate proce-
dure:



The hybrid system will not start even though the correct
starting procedure is being followed (



P. 277)

One of the following may be the cause of the problem:



The charging cable may be attached to the vehicle. (



P. 111)



The electronic key may not be functioning properly.

(



P. 616)



There may not be sufficient fuel in the vehicle’s tank.
Refuel the vehicle.



There may be a malfunction in the immobilizer system.

(



P. 190)



There may be a malfunction in the P position control system.

(



P. 2 82, 569)

: It may not be possible to shift the shift position from P to other posi-

tion.



The interior lights and headlights are dim, or the horn does
not sound or sounds at a low volume

One of the following may be the cause of the problem:



The 12-volt battery may be discharged. (



P. 619)



The 12-volt battery terminal connections may be loose or cor-
roded.

Summary of Contents for Prius









































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Prius

Reviews:

Related manuals for Prius

Brands by name

Popular brands

Toyota Prius, Manual

Search results

Summary of Contents for Prius

Reviews:

Related manuals for Prius

Brands by name

Popular brands