Toyota Prius HSD 2006 Owner'S Manual Download

Page: 148 / 465

148

The vehicle stability control system

helps provide integrated control of the

systems such as anti

−

lock brake sys-

tem, brake assist system, hybrid system

control, etc. This system automatically

controls the brakes and hybrid system
to help prevent the vehicle from skid-

ding when cornering on a slippery road

surface or operating steering wheel
abruptly.

This system activates when the vehicle

speed is more than about 15 km/h (9
mph).

CAUTION

Do not rely exclusively on the ve-
hicle stability control system. Even

if the vehicle stability control sys-

tem is operating, you must always
drive carefully and attentively to

avoid death or serious injury. Reck-

less driving will result in an unex-
pected accident. If the slip indicator

light flashes, sounding an alarm,

special care should be taken while
driving.

Only use tires of specified size. The

size, manufacturer, brand and tread
pattern for all 4 tires should be the

same. If you use tires other than
specified, or mixed types or size,

the vehicle stability control system

may not function correctly. When
replacing the tires or wheels, con-

tact your Toyota dealer. (See

“Checking and replacing tires” on
page 407.)

25p115a

Slip indicator light

If the vehicle is going to skid during driv-

ing, the slip indicator light blinks and an
alarm sounds intermittently. Special care

should be taken while driving.
The slip indicator light blinks in the follow-
ing conditions also.

The vehicle tires are racing. Utmost
care is required when driving.

When the anti

−

lock brake system is

operating. See “Brake system” on page

325 for details.

Vehicle stability control

system

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands