Toyota Prius HSD 2006 Owner'S Manual Download Page 132

Page: 132 / 465

132

CHECKING SERVICE REMINDER INDICA-

TORS (except the low fuel level indica-

tor light)

1. Apply the parking brake.
2. Open one of the doors.

The open door warning light should

come on.

3. Close the door.

The open door warning light should go

off.

4. Press the “POWER” switch twice with-

out pressing the brake pedal to select

the “IG

−

ON” mode. At this time, all the

bulbs are checked in self

−

diagnosis

mode.

All the service reminder indicators ex-
cept the open door warning light come

on. The yellow brake system, “ABS”

and “VSC” warning lights turn off after
the “READY” light comes on.

There may be the case that the yellow
brake system, “ABS” and “VSC” warning

lights stay on for about 60 seconds after

the hybrid system is started. It is normal
if they go out after a while.
If any service reminder indicator or warn-

ing buzzer does not function as described
above, have it checked by your Toyota

dealer as soon as possible.

24p117

Type 1

24p006e

Type 2

If an error occurs in the system, the

warning message and icon appear.

For details on the warning display and
how to remedy the system, see the de-

scription on the following pages.

—Multi

−

information display

Summary of Contents for Prius HSD 2006


















































































































































































































































































































































































































































































Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands

Toyota Prius HSD 2006, Owner'S Manual

Search results

Summary of Contents for Prius HSD 2006

Reviews:

Related manuals for Prius HSD 2006

Brands by name

Popular brands