62
The tire pressure warning system can be selected on “
” of the Multi-Information
Display (MID).
System reset initialization
(1) Press “
” switches and select “
” from the Multi-Information Display (MID).
(2) Press “
” switches and select the “
Vehicle Settings” then press “
.”
(3) Press “
” switches and select “TPWS setting” and then press “
.”
(4) Press “
” switches and select “Tire Pressure Setting” and then press “
.”
- Setting by selecting a specified tire inflation pressure -
(5) Press “
”
switches and select “Setting by Specified Pressure” and then
press “
.”
(6) Press “
” switches and select the desired tire pressures, then press “
.”
The tire pressure warning light will slowly blink three times.
- Setting using the current tire inflation pressure -
(5) Press “
” switches and select “Setting by Current Pressure” and then
press “
.” The tire pressure warning light will slowly blink three times and a
message indicating that tire pressure is being set will be displayed on the MID.
The tire pressure detected by the tire pressure warning system can be displayed
on the Multi-Information Display (MID).
If the tire pressure indicator flashes for 1 minute and then remains on, take the
vehicle to your local Toyota dealer.
Refer to the load label on the door jamb or the “Owner’s Manual”
for tire inflation
specifications.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized
recently, setting the tire pressures to factory specifications should
turn off the light.
Tire Pressure Monitoring (warning) System
(TPMS)
SAFETY & EMERGENCY FEATURES
