4.
5.
8. Check that both Front and Rear Side Visor are on
the same level.
Then slowly peel off the tape liner and press Side
Visor to the vehicle starting from the middle to the
direction shown in the picture.
10. Pull the Side Visor gently to check that adhesive
tapes are properflly attached in all area.
11. Repeat the steps 1-10 to install on the other side.
10
7. Attach the Rear Side Visor to Door Frame by using
position template as a guide.
*The top edge of the Rear Side Visor must be touch
with the bottom edge of the position template, while
the front edge of the Rear Side Visor must be align
with the door edge.
9. Assembly the Brackets
9.1 Slide the Bracket to the Emboss.
9.2 Press the Bracket to lock with the Side Visor.
CAUTION :
When installing the Brackets, use your hand to press the
outer surface of Side Visor to make sure that the Side
Visor will not be detach.
BRKT
Side Visor
BRKT
Side Visor
** The correct assembly
condition of the Bracket
Do not press the bracket
to the hole is not align.
Manually adjust the hole to
align with the emboss ffiifirst
before press the bracket to
lock with the emboss .
9
9
CAUTION:
- The Side Visor must only be pressed at the adhesive
area. If pressed wrongly, the tapes may not be fully
adhere.
8
7
0 mm.
BRKT
Side Visor
CAUTION
1
2
2
