Toyota Paseo 1998 Manual Download Page 69

Page: 69 / 194

WWW.MANUALS.WS

Part 1
OPERATION OF
INSTRUMENTS
AND CONTROLS—

Chapter 1- 5
Gauges, Meters and
Service reminder
indicators

Fuel gauge

Engine coolant temperature
gauge

Tachometer

Odometer and trip meter

Service reminder indicators and
warning buzzers

Fuel gauge

With tachometer

Without tachometer

The gauge works when the ignition
switch is on and indicates the approxi-
mate quantity of fuel remaining in the
tank.

Nearly full—Needle at ”F”
Nearly empty—Needle at ”E”

It is a good idea to keep the tank over
1/4 full.

This fuel gauge has a non- return type
needle which remains at the last indicated
position when the ignition switch is turned
off.

If the fuel level approaches ”E”, fill the
fuel tank as soon as possible.

On inclines or curves, due to the move-
ment of fuel in the tank, the fuel gauge
needle may fluctuate.

If the fuel tank is completely empty, the
malfunction indicator lamp comes on. Fill
the fuel tank immediately.

The indicator lamp goes off after driving
several times. If the indicator lamp does
not go off, contact your Toyota dealer as
soon as possible.

Summary of Contents for Paseo 1998



































































































































































































Search results

Summary of Contents for Paseo 1998

Reviews:

Related manuals for Paseo 1998

Brands by name

Popular brands

Toyota Paseo 1998, Manual

Search results

Summary of Contents for Paseo 1998

Reviews:

Related manuals for Paseo 1998

Brands by name

Popular brands