Toyota OM30875U Manual Download

Page: 59 / 144

ROUTE GUIDANCE

When approaching a freeway exit or
junction

When the vehicle approaches an exit or

junction, the guidance screen for the free-

way will be displayed.

Road/area name

Distance from the current position
to the exit or junction

Current position

“OFF”:

The guidance screen on freeway

disappears and the map screen appears.
When touching

or pushing the

“MAP/VOICE”

button, the guidance

screen on freeway reappears.

When approaching an intersection

When the vehicle approaches an intersec-

tion, the intersection guidance screen will

be displayed.

Next street name

Distance to the intersection

Current position

“OFF”:

The intersection guidance screen

disappears and the map screen appears.
When touching

or pushing the

“MAP/VOICE”

button, the intersection

guidance screen reappears.

Summary of Contents for OM30875U

















































































































































Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands

Toyota OM30875U, Manual

Search results

Summary of Contents for OM30875U

Reviews:

Related manuals for OM30875U

Brands by name

Popular brands