Toyota IQ 2012 Owner'S Manual Download Page 40

Page: 40 / 476

1-2. Opening, closing and locking the doors

iQ_WE_74014E

Unlocking and locking the doors

Grip the handle to unlock the
doors.

Make sure to touch the sensor on
the back of the handle.

The door cannot be unlocked for
3 seconds after the door is
locked.

Touch the lock sensor to lock the
doors.

Unlocking and locking the back door

Press the unlock button to
unlock the back door.

Press and hold the button for 1
second to open the back door.

The door cannot be unlocked for
3 seconds after the door is
locked.

Lock the back door again when
you leave the vehicle. The back
door will not lock automatically
after it has been opened and then
closed.

Summary of Contents for IQ 2012





























































































































































































































































































































































































































































































Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands

Toyota IQ 2012, Owner'S Manual

Search results

Summary of Contents for IQ 2012

Reviews:

Related manuals for IQ 2012

Brands by name

Popular brands