Toyota Highlander guide Service Manual Download Page 337 | Manualshive

Page: 337 / 732

background image

337

4-5. Using the driving support systems

4

Drivin

g

HIGHLANDER_U (OM0E017U)

■

Activating the downhill assist control system

Press the “DAC” switch.

The downhill assist control sys-
tem indicator will come on to
indicate that the downhill assist
control system is activated.
Pressing the switch again turns
the system off.

The slip indicator will flash to indi-
cate that the downhill assist con-
trol system is operating, and the
stop lights and high mounted
stoplight will turn on.

■

If the downhill assist control system indicator flashes

●

In the following situations, the indicator flashes and the system will not operate:
• The shift lever is in P.
• The accelerator or brake pedal is depressed.
• The vehicle speed exceeds approximately 18 mph (30 km/h).
• The brake system overheats.

The system will cease operation. At this time, a buzzer sounds, the down-
hill assist control system indicator flashes and “Traction Control Turned
Off” is shown on the multi-information display. Refrain from using the sys-
tem until the downhill assist control system indicator stays on and “Trac-
tion Control Turned Off” displayed on the multi-information display goes
out. (The vehicle can be driven normally during this time.)

Downhill assist control system (AWD mod-

els)

The downhill assist control system helps to prevent excessive
speed on steep downhill slopes.
The system will operate when the vehicle is traveling under
18 mph (30 km/h).

While the downhill assist control system is operating

«
...
335
336
337
338
339
...
»

Summary of Contents for Highlander guide





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Highlander guide

Brand: TATA Motors Pages: 94

Brand: GÄN Pages: 24

Brand: Lancia Pages: 386

10-8002-C11998B

Brand: Saleen Pages: 12

2013 Buick Verano

Brand: Buick Pages: 5

ANDROID INTERFACE

Brand: GMC Pages: 18

Brand: Prorack Pages: 15

Brand: Masterack Pages: 4

Brand: Over Armour Offroad Pages: 5

FIX&GO automatic

Brand: Alfa Romeo Pages: 40

Autostacker PL-6SR

Brand: BendPak Pages: 104

Brand: TBC Pages: 12

Brand: Prorack Pages: 14

Brand: Cadillac Pages: 407

Brand: Chevrolet Pages: 412

Brand: Yakima Pages: 12

Brand: FALCON RIDGE Pages: 6

Brand: Scion Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands