Toyota GR Supra 2022 Owner'S Manual Download Page 220

Page: 220 / 356

220

3-1. CONTROLS

More than one assistance func-
tion can be active at the same
time.

The assistance functions can be
manually activated.

Move the Controller to the
right, if needed.

With corresponding equip-
ment:

"Camera

image"



"Parking aid lines".

Pathway lines and turning radius
lines are displayed, refer to page

220



"Obstacle marking".

Depending on the vehicle equip-
ment, the obstacles detected by
Parking Sensors are displayed,
refer to page

221

, by markings.

■

Pathway lines

Pathway lines help you to esti-
mate the space required when
parking and maneuvering on
level roads.

Pathway lines depend on the
steering angle and are continu-
ously adjusted to the steering
wheel movements.

■

Turning radius lines

Turning radius lines can only be
superimposed on the camera
image together with pathway
lines.

Turning radius lines show the
course of the smallest possible
turning radius on a level road.

Only one turning radius line is
displayed after the steering
wheel is turned past a certain
angle.

■

Parking using pathway and
turning radius lines

Position the vehicle so that
the red turning radius line
leads to within the limits of
the parking space.

Turn the steering wheel to
the point where the green
pathway line covers the cor-

Display on the Control Dis-
play

General information

Parking aid lines

Summary of Contents for GR Supra 2022





































































































































































































































































































































































Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands

Toyota GR Supra 2022, Owner'S Manual

Search results

Summary of Contents for GR Supra 2022

Reviews:

Related manuals for GR Supra 2022

Brands by name

Popular brands