Toyota FJ cruiser Owner'S Manual Download Page 76

Page: 76 / 547

1-3. Adjustable components (seats, mirrors, steering wheel)

riv

FJCRUISER_OM_General_OM35B53W

Seat belts

Make sure that all occupants are wearing their seat belts before driv-

ing the vehicle.

■

Correct use of the seat belts

●

Extend the shoulder belt so
that it comes fully over the
shoulder, but does not
come into contact with the
neck or slide off the shoul-
der.

●

Position the lap belt as low
as possible over the hips.

●

Adjust the position of the
seatback. Sit up straight
and well back in the seat.

●

Do not twist the seat belt.

■

Fastening and releasing the seat belt

Fastening the belt

Push the tab into the buckle
until a clicking sound is heard.

Summary of Contents for FJ cruiser




































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FJ cruiser

Reviews:

Related manuals for FJ cruiser

Brands by name

Popular brands

Toyota FJ cruiser, Owner'S Manual

Search results

Summary of Contents for FJ cruiser

Reviews:

Related manuals for FJ cruiser

Brands by name

Popular brands