Toyota CRT2242, Service Manual

Page: 34 / 34

GM-8886ZT,8886ZT-91
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A.
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 501 Orchard Road, #10-00, Wheelock Place, Singapore 23880
C
PIONEER ELECTRONIC CORPORATION 1998
K-ZZS. JULY 1998 Printed in Japan
5. Details
1
Frequency characteristics adjustment function
• The system changes submodes cyclically every
time the [FM1/2] button is pressed when
"AUDIO" is displayed.
Set EQ Point 1
t
Set EQ Point 2
t
Set attenua-
tion
t
"AUDIO"
• Set EQ Point 1
The system displays “P1” and EQ management
number. The EQ management number
ascends/descends every time the UP/DOWN but-
ton is pressed.The EQ management number con-
sists of three digits (000 to 286). Initial value is
000 (no setting).
• Set EQ Point 2
The system displays “P2” and EQ management
number. The EQ management number
ascends/descends every time the UP/DOWN but-
ton is pressed. The EQ management number
consists of three digits (000 to 176). Initial value
is 000 (no setting).
• Set attenuation
The system displays “L” and attenuation value.
Use the UP/DOWN button to change attenuation
within a range from 0 to -20 dB at increments of
1 dB. Attenuation value is shown in two digits
from 00 to 20 (20 = -20 dB). Initial value is 00 (no
setting).
2
level adjustment function
• The system changes submodes cyclically every
time the [TAPE] button is pressed when "AUDIO"
is displayed.
Set front
t
Set rear
t
Set woofer
t
“AUDIO”
• Set front
The system displays "F" and level value.Use the
UP/DOWN button to change level value within a
range from 0 to -80 dB at increments of 1 dB.
Level value is shown in two digits from 00 to 80
(80 = -80 dB). Initial value is 00 (no setting).
• Set rear
The system displays "R" and level value. Use the
UP/DOWN button to change level value within a
range from 0 to -80 dB at increments of 1 dB.
Level value is shown in two digits from 00 to 80
(80 = -80 dB). Initial value is 00 (no setting).
• Set woofer
The system displays "W" and level value. Use the
UP/DOWN button to change level value within a
range from 0 to -80 dB at increments of 1 dB.
Level value is shown in two digits from 00 to 80
(80 = -80 dB). Initial value is 00 (no setting).
Notes:
1) Pressing the TAPE button during adjustment of fre-
quency characteristics is invalid. Pressing the
[FM1/2] button during level adjustment is invalid.
2) The UP/DOWN button mentioned above means the
[SEEK] key.
8. OPERATIONS AND SPECIFICATIONS
SPECIFICATIONS
Power source . . . . . . . . . . . . .13.2V(10.5-16.0V)
Grounding . . . . . . . . . . . . . . . .NEGATIVE TYPE
Dimensions . . . . . . . . . . . . . . .293(W)x109(H)x130(D)
Weight . . . . . . . . . . . . . . . . . . .1.325kg
Maximum output power . . . .16W(Front)
16W(Rear)
32W(Woofer)