30
PAIRING BLUETOOTH
®
PHONE FOR THE FIRST TIME
Touch Screen Display Audio and Display Audio with Navigation
1
To use the hands-free system
3
, it is necessary to pair a Bluetooth
®2
phone with the system. Once the phone has been paired, it is possible
to use the hands-free system
3
. This operation cannot be performed
while driving. (NOTE: The Bluetooth
®2
pairing process for Non-
Navigation and Navigation
1
units differ, as noted below)
You can pair up to 4 devices.
1.Turn the Bluetooth
®2
connection
setting of your cellular phone ON.
[See Figures 1 & 2]
a. Pairing is not available when
Bluetooth
®2
setting of your
phone is set to OFF.
2. Press the “Phone” button to
display the
“Phone” screen. Touch
“Yes” to register a phone. (Non-
Navigation units – skip to step 4)
[See Figure 3]
3. Touch the “Make system
discoverable”* button. [See Figure 4]
* On Android
™
devices, you will need
to make your phone visible to searching
devices.
5. A message will display on the
head unit requesting messaging
access.
6. Touch “OK” when the connection status changes from “Connection
waiting...” to “Connected”.
7.
For Navigation
1
Units Only:
Confirm that the passkey number displayed
on screen matches the passkey displayed on your Bluetooth
®2
device and
press
“Yes”.
iPhone
®4
:
Using your smartphone,
you may need to allow head unit
access to your messaging and
contacts. [See Figure 6]
Only current iPhone
®4
text messages
can be viewed on the head unit.
iPhone
®4
does not allow text message
reply.
Android
™
:
Using your smartphone,
you may need to allow head unit
access to your messaging and
contacts. [See Figure 7]
It is recommended to check the “Don’t
ask again” box, so as not to have to
press OK every time the phone makes
a Bluetooth
®2
connection with your
Toyota.
4. Next, search for “My Toyota”
from your phone’s Bluetooth
®2
screen and select
“My Toyota” [See
Figure 5]
• To cancel the registration, touch
“Cancel”.
•
Navigation units
- skip to step 7
1. Availability & accuracy of the information provided by the navigation system is dependent upon many factors. Use common sense when
relying on information provided. Services & programming subject to change. Services not available in every city or roadway. Updates may
be available from your dealer at an additional cost. See Owner’s Manual for details. 2. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth® enabled phone
must first be paired. Phone performance depends on software, coverage & carrier. 3. Concentrating on the road should always be your
first priority while driving. Do not use the hands-free phone system if it will distract you. 4. iPhone® is not included. iPhone® is registered
trademarks of Apple, Inc.
Figure 3
Figure 1:
iOS
Figure 2:
Android
Figure 4:
With Navigation
1
NOTE: A message will display on the head unit requesting messaging
access. Please refer to step 5
2017_Corolla_iM_QRG_D6-BT.indd 30
9/23/16 7:21 PM
Summary of Contents for COROLLA iM 2018
Page 34: ...32 NOTES ...
