Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 70 / 491

COROLLA HV_ 国瑞 _GE

1-2. Child safety

■

ISOFIX lower anchorages
(ISOFIX child restraint system)

Lower anchorages are provided for

the outboard rear seats. (Marks dis-

playing the location of the anchor-

ages are attached to the seats.)



Except for GCC countries

and

Taiwan



For GCC countries



For Taiwan

: Saudi Arabia, Sultanate of Oman,

Bahrain, United Arab Emirates, Qatar

and Kuwait

■

Installation with ISOFIX lower
anchorage (ISOFIX child
restraint system)

Install the child restraint system in

accordance to the operation man-

WARNING

●

Ensure that the belt and plate are

securely locked and the seat belt is

not twisted.

●

Shake the child restraint system left

and right, and forward and back-

ward to ensure that it has been

securely installed.

●

After securing a child restraint sys-

tem, never adjust the seat.

●

When a junior seat (booster seat) is

installed, always ensure that the

shoulder belt is positioned across

the center of the child’s shoulder.

The belt should be kept away from

the child’s neck, but not so that it

could fall off the child’s shoulder.

●

Follow all installation instructions

provided by the child restraint sys-

tem manufacturer.

Child restraint system fixed
with an ISOFIX lower
anchorage

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands