Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 153 / 491

151

COROLLA HV_ 国瑞 _GE

3-5. Opening and closing the windows

Befor

e dr

ing

3-5.Opening and closing the windows

The power windows can be opened

and closed using the switches.

Operating the switch moves the

windows as follows:

Closing

One-touch closing

Opening

One-touch opening

: To stop the window partway, operate

the switch in the opposite direction.

■

The power windows can be oper-
ated when

The power switch is in ON.

■

Operating the power windows after
turning the hybrid system off

The power windows can be operated for

approximately 45 seconds after the

power switch is turned to ACC or OFF.

They cannot, however, be operated

once either front door is opened.

■

Jam protection function

If an object becomes jammed between

the window and the window frame while

the window is closing, window move-

ment is stopped and the window is

opened slightly.

■

Catch protection function

If an object becomes caught between

the door and window while the window

is opening, window movement is

stopped.

■

When the window cannot be
opened or closed

When the jam protection function or

catch protection function operates unu-

sually and the door window cannot be

opened or closed, perform the following

operations with the power window

switch of that door.

●

Stop the vehicle. With the power

switch in ON, within 4 seconds of the

jam protection function or catch pro-

tection function activating, continu-

ously operate the power window

switch in the one-touch closing direc-

tion or one-touch opening direction so

that the door window can be opened

and closed.

●

If the door window cannot be opened

and closed even when performing the

above operations, perform the follow-

ing procedure for function initializa-

tion.

Turn the power switch to ON.

Pull and hold the power window

switch in the one-touch closing

direction and completely close the

door window.

Release the power window switch

for a moment, resume pulling the

switch in the one-touch closing

direction, and hold it there for

approximately 6 seconds or more.

Press and hold the power window

switch in the one-touch opening

direction. After the door window is

completely opened, continue holding

the switch for an additional 1 second

or more.

Release the power window switch

for a moment, resume pushing the

switch in the one-touch opening

direction, and hold it there for

approximately 4 seconds or more.

Pull and hold the power window

switch in the one-touch closing

Power windows

Opening and closing the
power windows

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands