Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 150

Page: 150 / 491

148

COROLLA HV_ 国瑞 _GE

3-4. Adjusting the steering wheel and mirrors

■

To prevent sensor error (vehicles
with an auto anti-glare inside rear
view mirror)

To ensure that the sensors operate

properly, do not touch or cover them.

To select a mirror to adjust, turn

the switch.

Left
Right

Outside rear view mir-

rors

The rear view mirror’s position
can be adjusted to enable suf-
ficient confirmation of the rear
view.

WARNING

■

Important points while driving

Observe the following precautions

while driving.

Failure to do so may result in loss of

control of the vehicle and cause an

accident, resulting in death or serious

injury.

●

Do not adjust the mirrors while driv-

ing.

●

Do not drive with the mirrors folded.

●

Both the driver and passenger side

mirrors must be extended and prop-

erly adjusted before driving.

Adjustment procedure

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands