Toyota COROLLA CROSS, Manual

Page: 360 / 612

360
5-11. Voice command system operation
voice command operation,
select “Resume” or press the
talk switch.
●
If the system does not respond or
the confirmation screen does not
disappear, press the talk switch
and try again.
●
If a voice command cannot be rec-
ognized 3 consecutive times,
voice recognition will be canceled.
●
Voice recognition prompts can be
changed on the voice settings
screen. (

P.323)
This function can be used to cancel
voice guidance by turning the voice
prompts off. When you press the
talk switch while using this setting, a
beep sounds, and then you can
immediately say a command.
●
Some voice guidance can be can-
celed by setting voice prompts to
off. Use this setting when it is
desirable to say a command
immediately after pressing the talk
switch and hearing a beep.
To increase voice recognition
performance, use the “Tutori-
als” and “Voice Training” func-
tions on the “Getting Started
with Voice” screen. These func-
tions are only available when
the vehicle is not moving.
The “Tutorials” and “Voice Train-
ing” functions can also be
started on the voice settings
screen. (

P.323)
1
Press the talk switch.
2
Select the desired item to be
set.
Select to display the voice
command tutorials.
Select to train the voice com-
mand system.
The user will be asked to say 10
sample phrases. This will help the
voice command system adapt to
the user’s accent.
Select to prevent the screen
from being displayed again.
Select to proceed to the
voice command screen.
Increasing the voice rec-
ognition performance
www.carobook.com