manualshive.com logo in svg

Toyota COROLLA CROSS HYBRID 2020, Owner'S Manual

The Toyota COROLLA CROSS HYBRID 2020 Owner's Manual is an essential guide for every owner. Easily downloadable and completely free, this comprehensive manual provides detailed information on the vehicle's features, maintenance, and troubleshooting. Download it now from manualshive.com to maximize your driving experience.

Share
Download
background image

441

Alphabetical Index

COROLLA CROSS HYBRID_Kouzui_GE

Alphabetical Index

A

A/C

Air conditioning filter................... 353
Automatic air conditioning system

................................................. 300

Front seat concentrated airflow 

mode (S-FLOW) ...................... 303

ABS (Anti-lock Brake System) .... 239

Warning light .............................. 380

ACA (Active Cornering Assist).... 240
Active Cornering Assist (ACA).... 240
Air conditioning filter ................... 353
Air conditioning system

Air conditioning filter................... 353
Automatic air conditioning system

................................................. 300

Front seat concentrated airflow 

mode (S-FLOW) ...................... 303

Airbag manual on-off system........ 38
Airbags

Airbag manual on-off system ....... 38
Airbag operating conditions ......... 31
Airbag precautions for your child . 34
Correct driving posture................. 23
Curtain shield airbag operating con-

ditions ........................................ 31

Curtain shield airbag precautions 34
General airbag precautions.......... 34
Locations of airbags..................... 29
Modification and disposal of airbags

................................................... 36

Side airbag operating conditions.. 31
Side airbag precautions ............... 34
Side and curtain shield airbags oper-

ating conditions.......................... 31

Side and curtain shield airbags pre-

cautions ..................................... 34

SRS airbags................................. 29
SRS warning light ...................... 379

Alarm

Alarm............................................ 75
Warning buzzer.......................... 378

Antennas (smart entry & start sys-

tem).............................................. 127

Anti-lock Brake System (ABS).....239

Warning light ..............................380

Approach warning ........................215
Armrest..........................................316
Assist grips ...................................316
Audio system

Bluetooth

®

 audio ........................277

CD player ...................................261
iPod ............................................267
MP3/WMA disc...........................261
Optimal use ................................257
Steering wheel audio switch.......255
USB memory..............................272
USB port.....................................256

Audio system-linked display .........96
Automatic air conditioning system

.....................................................300

Automatic High Beam ..................174
Automatic light control system ...172
Auxiliary boxes .............................313
Average fuel economy ...................94
Average vehicle speed ...................97

B

Back door ......................................115
Back-up light

Replacing light bulbs ..................362

Back-up lights

Wattage......................................425

Battery (12-volt battery)

Battery checking.........................339
If the 12-volt battery is discharged

.................................................409

Preparing and checking before win-

ter.............................................247

Warning light ..............................379

Battery (traction battery)................67
Blind Spot Monitor (BSM) ............221
Bluetooth

®

Audio system..............................277
Hands-free system (for cellular 

phone)......................................292

Bottle holders................................310

COROLLA CROSS HYBRID_OM_General_OM16537E

Summary of Contents for COROLLA CROSS HYBRID 2020









































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for COROLLA CROSS HYBRID 2020

Federal Signal Corporation CommCenter D1 Series Installation And Service Instructions Manual preview
CommCenter D1 Series
Brand: Federal Signal Corporation Pages: 16
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Road Ranger H392 Installation Manual preview
H392
Brand: Road Ranger Pages: 22
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
S3 Power Sports S3193 Installation Instructions preview
S3193
Brand: S3 Power Sports Pages: 2
Subaru 2004 Impreza OUTBACK SPORT Owner'S Manual preview
2004 Impreza OUTBACK SPORT
Brand: Subaru Pages: 34
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
Axxess AXDSPX-TY1 Installation Instructions Manual preview
AXDSPX-TY1
Brand: Axxess Pages: 16
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
Volvo XC60 2009 Owner'S Manual preview
XC60 2009
Brand: Volvo Pages: 304
Mercedes-Benz G 55 AMG Operator'S Manual preview
G 55 AMG
Brand: Mercedes-Benz Pages: 284
Jeep 2014 All vehicles Warranty Information Booklet preview
2014 All vehicles
Brand: Jeep Pages: 44
Vauxhall Signum Owner'S Manual preview
Signum
Brand: Vauxhall Pages: 310
Whispbar K536W Fitting Instructions Manual preview
K536W
Brand: Whispbar Pages: 17
Yakima Prorack K370 Fitting Instructions Manual preview
Prorack K370
Brand: Yakima Pages: 14

Brands by name

Popular brands

Load more brands